Painto Fuling

Cement Products

Description

This is a one component antifouling coating based on ion exchange technology. It provides cost efficient fouling protection. This is achieved by self polishing characteristics reducing hull deterioration. To be used as finish coat in immersed environments only. Suitable on approved primers and tie coats on aluminium, carbon steel and wooden substrates.

Properties

1- Natural and easy to operate just add water.
2- The raw materials have been selected according to the highest standards.
3- It gives decorative cool shape.
4- Mixture accurate and homogunis as a result of control on production systems that we follow.
5- A high productivity rates.
6- Resistant surface salinity are higher than other similar products.
7- Resistant harsh weather conditions.

Marine

Recommended for under water hull in drydocking. The product can be used for long service periods up to 24 months as a part of a complete coating system.

Colors:

dark red

Surface preparation

To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination.

Typical use

Application methods
The product can be applied by

Roller

Recommended. Care must be taken to achieve the specified dry film thickness.

Spray

Use air spray or airless spray.

Brush

Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.

Recommended type of primer

Anticorrosive primer system suitable for purpose with Safeguard Universal ES or Safeguard Plus as a sealer coat/ tie coat.

Other systems may be specified, depending on area of use.

Drying and Curing time

Drying and curing times are determined under controlled temperatures and relative humidity below 85 %, and at average of the DFT range for the product.

Surface (touch) dry: The state of drying when slight pressure with a finger does not leave an imprint or reveal tackiness.

Dry to over coat, minimum: The recommended shortest time before the next coat can be applied.

Dried/cured for immersion : Minimum time before the coating can be permanently immersed in sea water.

Caution

This product is for professional use only. The applicators and operators shall be trained, experienced and have the capability and equipment to mix/stir and apply the coatings correctly and Applicators and operators shall use appropriate personal protection equipment when using this product. This guideline is given based on the current knowledge of the product. Any suggested deviation to suit the site conditions shall

Storage

The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.

Health and Safety

Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do not inhale spray mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.

We Offer Financial & Superior Services

A small river named Duden flows by their place and supplies it with the necessary
regelialia. It is a paradisematic country, in which

Learn more

Request a Call Back?

A small river named Duden flows by their place and supplies it with the necessary regelialia. It is a paradise

Make an Appointment

for any inquiry

Building

0 +

Clients Rating

0 +

products

0 +