Surface processing
The surface to be installed must be strong, clean and free of weak and disassembled parts Paints, oils, grease, tension oils and concrete processing materials are recommended to contact technical and engineering affairs to process the surface if such things are found.

Mixing method:-
Panto Fix is gradually added to the water by 1.5 weight or 1.25 in size with continued Mix until smooth and then leave the mixture five minutes before use (preferably mechanically mixed) and take into account the slow speed of mixing

Application steps:-
A - The individual must be done with regular thickness 3 to 6 mm For an area of no more than 1 to 2 m
B- The tiles to be installed are placed in the appropriate position with a simple circular motion to make sure that the tiles are fully attached to the surface below it while leaving a distance of at least 2 mm between each two adjacent tiles.
C- Any excess amount before drying is removed from the face of the tiles using a wet sponge, followed by a dry cloth.
D- Leave the tiles until dry for at least 24 hours before starting to fill the brides.
E - The clarification of the field of use for the management of technical and engineering affairs of the company before ordering the product.